KatT2-20190716

Märkische Stanz-Partner STANZNORMALIEN / STANDARD DIE COMPONENTS [ 8 ] Inhalt Katalog 2: Gasdruckfedern (GB) Content Catalogue 2: Gas springs (GB) Artikel Article Best.-Nr. Order no. Seite Page Pressure controller unit NCCA.1.1 NC.130.17 Pressure monitor HS Z 20 NC.130.8, HS.34 R / S Run tee swivel nuts HS NF 3300 HS.42 Rupture disc HS RD 2150 HS.26 Rupture disk 360 bar, Rupture disk 517 bar NCR.99.139.1, NCR.99.140.1 NC.130.25 Sealing plugs with internal ports HS NF 771 HS.24, HS.25 Sealing plugs with rupture disc HS NF 771 RD HS.25 Sign NC Hinweisschild NC.130.15 Standard cylinders HS MOR … XP, HS SB HS.15 - 17, HS.22 Standard cylinders, smaller height HS MOR-D. . XP, HS TSB HS.18 - 21 Straight fitting HS NF 1000-4-G1/8“, HS NF 1001-4-G1/8“ NC.130.18, NC.130.23 Straight fitting with adapter HS NF 1003-4-G1/8“ NC.130.26 Straight fittings HS NF 1000 HS.40 T / U T-Connector HS NF 3000-4-G1/8” NC.130.18 T-Connector with connecting nut HS NF 3000-4 NC.130.19 T-Connector HS NF 3001-4, HS NF 3500-4, HS NF 3501-4 NC.130.19, NC.130.23 Threaded joint, 45° HS NF 4500-4-G1/8”, HS NF 4501-4 NC.130.18, NC.130.23 Threaded joint, 45°, with connecting nut HS NF 4500-4 NC.130.19 Threaded joint, 90° HS NF 2500-4, HS NF 2501-4 NC.130.19, NC.130.23 Threaded joint, 90° HS NF 2000-4-G1/8”, HS NF 2001-4 NC.130.18, NC.130.23 Threaded joint, 90°, with connecting nut HS NF 2000-4 NC.130.19 Threaded springs, NC.060.00 series, 50 - 500 daN, Stroke 5 - 125 mm, Ø M28x1,5 - M38x1,5 NC.060.20 NC.060.37 - 4 3 Threaded springs, NC.070 series, 250 - 500 daN, Stroke 12 - 100 mm, Ø 32 - 45 mm NC.070.00 NC.070.1 - 7 Three way adapter NCZ.03 NC.130.31 Thrust plates NCP SPVD, NCP SPFI, NCP SPPS NC.130.1, NC.130.2 Toolkit für assembling NCTU.00.033 NC.130.39 Torque wrench NCTU.00.009 NC.130.34 Two way Adapter NCZ.02 NC.130.30 V / W Valve NCTU.00.002, NCR.99.082, NCR.99.147 NC.130.33, NC.130.34 Valve-pliers NCTU.00.001 NC.130.33 Valve-tool NCTU.00.003 NC.130.33